Yeah we dislike all these requests for high volume CPUs but hear me out on this one.
This is the spec I need:
8 CPU Cores (minimum, more is preferred) at 2.0 GHz minimum
512 MB RAM (1GB Preferred) (KVM because I don't think OpenVZ works for this)
20 GB HDD (An installation of Ubuntu and some calculation files)
20 GB Bandwidth (Just uploading and pulling small files here and there)
Location: Anywhere Cheap
Reasoning: I need a temporary VM with high CPU usage for one week. This high CPU usage is estimated to be about 3-4 hours about six times on the span of two-three-ish days (but could be longer). No malicious intent, it's just that previously my dedicated servers used to be running these calculations but one of them is giving me grief and I'm almost done with everything I need.
This will be running CFD (Computational Fluid Dynamics) Modeling software. Specifically, I'll be using OpenFOAM (http://openfoam.com).
To show an example of what I'm doing: http://imgur.com/a/ekwtP#0 (this is a very basic model that I can generate in a few seconds)
Each of those squares is a single cell, and a calculation based on what the water/fluid is doing in that square is done for each time at each iteration. Therefore, the need for large computational power (CPU cores).
Tell me what price you guys are willing to give this for me. I'll pay for a full month if required.
Thanks!
This is the spec I need:
8 CPU Cores (minimum, more is preferred) at 2.0 GHz minimum
512 MB RAM (1GB Preferred) (KVM because I don't think OpenVZ works for this)
20 GB HDD (An installation of Ubuntu and some calculation files)
20 GB Bandwidth (Just uploading and pulling small files here and there)
Location: Anywhere Cheap
Reasoning: I need a temporary VM with high CPU usage for one week. This high CPU usage is estimated to be about 3-4 hours about six times on the span of two-three-ish days (but could be longer). No malicious intent, it's just that previously my dedicated servers used to be running these calculations but one of them is giving me grief and I'm almost done with everything I need.
This will be running CFD (Computational Fluid Dynamics) Modeling software. Specifically, I'll be using OpenFOAM (http://openfoam.com).
To show an example of what I'm doing: http://imgur.com/a/ekwtP#0 (this is a very basic model that I can generate in a few seconds)
Each of those squares is a single cell, and a calculation based on what the water/fluid is doing in that square is done for each time at each iteration. Therefore, the need for large computational power (CPU cores).
Tell me what price you guys are willing to give this for me. I'll pay for a full month if required.
Thanks!
Last edited by a moderator: