best way to imperment gre?

[mtwiscool]

http://wiki.buyvm.net/doku.php/gre_tunnel

i want to allocate a ip address to a vps 192.168.168.2 but i want to have a ip address have an connection via it.

root@server:/# ping google.com -c 1 ping: unknown host google.com root@server:/#

 

[LusoVPS]

try to ping 8.8.8.8. If that works, then you have a problem with the DNS resolution.

 

[VMBox]

192.168.168.1/30 source?

192.168.168.2/30 destination?

If so 192.168.168.2 is binded to the hostnode not the VM.

You need to route a  /29 to route an additional v4 address to the VM.

 

[MartinD]

What is imperment?

 

[Amitz]

What is imperment?

The same as unmeated, just different.

 

[switsys]

What is imperment?

The same as unmeated, just different.

I thought it was the same as 'binded'

 

[wlanboy]

What is imperment?

I think he wanted to write "implement".

Can someone change the thread title?

 

[Mr. Obvious]

Don't, its funnier this way.

 

[mtwiscool]

[root@ouille47-39 ~]# curl http://www.cpanel.net/showip.cgi --interface 192.168.168.12
95.128.47.39
[root@ouille47-39 ~]#

ipv4 node:

echo 'net.ipv4.ip_forward=1' >> /etc/sysctl.conf
sysctl -p
iptunnel add gre1 mode gre local 23.94.62.8 remote 95.128.47.39 ttl 255
ip addr add 192.168.168.11/30 dev gre1
ip link set gre1 up

iptables -t nat -A POSTROUTING -s 192.168.168.10/30 -j SNAT --to-source 23.94.62.8

ipv4 slave:

iptunnel add gr1 mode gre local 95.128.47.39 remote 23.94.62.8 ttl 255
ip addr add 192.168.168.12/30 dev gr1
ip link set gr1 up
echo '100 BUYVM' >> /etc/iproute2/rt_tables
ip rule add from 192.168.168.10/30 table BUYVM
ip route add default via 192.168.168.11 table BUYVM

what am i doing wrong?

 

[Aldryic C'boas]

Posting.

 

[mtwiscool]

Posting.

any the rest of your reply please?

 

[Aldryic C'boas]

That was the entirety of the reply.

 

[mtwiscool]

That was the entirety of the reply.

i tohught you would be helpful.

 

[Aldryic C'boas]

If a little bit of malice makes you realize that you have to actually contribute to a community instead of just begging its members do fix all of your screwups, then I consider that very helpful.  And I've told you before:

That aside - this is a community forum, not the BuyVM helpdesk.  You are not one of my clients, so I have no real reason to use any tact when speaking to you.  With that said - if you are old enough to pretend that you could be a host, you're old enough to not cry whenever someone says something you don't like.

Take the hint - stop being a cancer on the community with the incessant "hay guys I have a new project (no honest I'll really finish this one" and abusing this place just for free tech support.  The latter alone just goes to show how absolutely unqualified, unsuitable, and generally unable you are to actually pull off any of your ridiculous ideas.

 

[mtwiscool]

ping tests:

master:

root@ipv4:~# ping 192.168.168.2 -c 1
PING 192.168.168.2 (192.168.168.2) 56(84) bytes of data.

--- 192.168.168.2 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms

root@ipv4:~#

destination:

--- 192.168.168.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 112ms
rtt min/avg/max/mdev = 112.791/112.791/112.791/0.000 ms
You have new mail in /var/spool/mail/root
[root@ouille47-39 ~]#

as you can see i can not ping from master to destination but can the other way.

and outgoing test times out.