amuck-landowner

Search results

  1. ICPH

    Dedi E3 4/8 3,3ghz+, 32gb ram, 120-240GB SSD, 30IPs <90

    it is for OpenVZ VPS and shared hosting reselling.. Untill HDD (SSD) die, im telling because cheaps SSDs may tend to die faster in such server PS: cloudshards is my current server provider, im looking for secondary server
  2. ICPH

    Dedi E3 4/8 3,3ghz+, 32gb ram, 120-240GB SSD, 30IPs <90

    Is there any offer please for this? Dedi E3 4/8 3,3ghz+, 32gb ram, 240GB SSD, 30IPs, any location, 100mbit unlimit. price under $90, monthly payment, for around 2 years or untill HDD die. server can receive like 5 abuse reports monthly, like phishing spreading malicious software, i react and...
  3. ICPH

    Cheapest source of a WHMCS license?

    skynethosting cpanel reseller plan cost $10/mo. and includes whmcs (whmcs lic. must be hosted on this hosting, not elsewere, if u need SSL, you need to buy IP from them which is not cheap
  4. ICPH

    Cheapest PositiveSSL?

    i think cheapest is for around $2 from namecheap, you need to transfer your domain to them ($9 around) which will renew it +1 year..
  5. ICPH

    $15 server - CPU i7 4/8, RAM 32GB, SSD

    Hello dear members, i got following server: Intel i7 4770K 4 c/ 8 t 3.5 GHz+ 32 GB  1866 MHz 120 GB SSD but i dont have any use for it. Im offering it here for $10 (paypal) for the next 12 days around Any linux distro can be installed on it. or awaiting...
  6. ICPH

    Why i should not use SSD disk on openvz server?

    Hello,   a Samsung 840 EVO 120Gb (consumer grade)   why i should NOT use it on the server used for openvz?   Currently there is 7000rpm disk with Average writing: 2Mb/s Average reading: 2Mb/s   the iostat shows usually 99-100% utilization, "top" command shows around 10 %wa value.  ...
  7. ICPH

    Core i5-7 for OpenVZ virtualisation?

    Hello, i seen Core i7 dont have "Intel® vPro™ Technology" when comparing to E3 Xeon. and also dont have "Intel® Virtualization Technology for Directed I/O (VT-d) ‡" Is it too bad (how bad, why?) if i would like to use that Core i7 for OpenVZ (virtualization)? Comparison I7 vs E3...
  8. ICPH

    Why so high load on OpenVZ vps while it has tiny resources?

    Thank you, so the load average of the OpenVZ server is not measure of how it is used, while i have a few tiny VPSs which each do lets say 100.00 load, then when OpenVZ server load be 500.00 it might not be an issue, so which value/s an Openvz admin should monitor when load value not? (i mean...
  9. ICPH

    Why so high load on OpenVZ vps while it has tiny resources?

    Hello, at openvz server is running an vps, "vzlist" shows that it has load somewhere at 40.00 and slowly growing. Im asking why so high wile this VPS has only one CPU core assigned by openvz and only fraction of the openvz server ram? this VPS ram is exhausted and cpu too thanks to some .php...
  10. ICPH

    GetDedi 2xL5520 $55 | E3 $99 | i3 $49 | L5639 $85 | 100TB upgrades | Lots IPs

    i can recommend cloudshards, good support, im happy with the service so far (using it several months - 5+)
  11. ICPH

    How discover OpenVZ process source VM

    Hello, on an openvz server with many virtual machines, i discover an suspicious process, how to quickly discover on which VM (virtual machine) it is running? thanks
  12. ICPH

    Too bad if Intel® Virtualization Technology not supported on VPS node?

    Hello, how bad it is if "Intel® Virtualization Technology" is not supported by processor on VPS host server? How much % roughly it degrades performance..?
  13. ICPH

    MySQL on SSD or classic HDD?

    Do You think SSD or classic HDD is better to be used for MySQL data? when i do "iotop -a" i see almost exclusivelly io usage in like 15 processes like this: but i read SSDs are limitted on writing cycles (if i say correct), reading is unlimitted on SSD. So while i see write rate around 5...
  14. ICPH

    Best disk storage/raid server setup for VPS host server?

    Hello, i found that my hosting server require more io than one classic 7200rpm disk can handle. I think io of two 7200rpm disks is minimum that i should have. Three 7200 drives io quite sufficing with some room. There are SSDs but its said they are limitted on writing (i have 5mb/s data...
  15. ICPH

    CentOS server @openvz and connlimit iptables module, how to make it working?

    Hello, an openvz host server and an virtual machine on it. virtual machine has loaded iptables modules. But on VM a firewall (csf) test returns error: dmesg returns: The relevant centos errors to this: http://bugs.centos.org/view.php?id=5749 https://bugzilla.redhat.com/show_bug.cgi?id=521999...
  16. ICPH

    Higher %wa value on OpenVZ server

    - It happens on host node and also on containers. - Almost all commands, except for example command "date", free -m, df -h are slow. THe loggin in is like: wait 5 seconds, write username, enter, wait 5 seconds, and evena fter confirming password, last login 5 seconds.. like this, and commands...
  17. ICPH

    Higher %wa value on OpenVZ server

    thx, %iddle appears to be average 50-60% when doing "sar -u" i also created this topic because any actions via terminal (SSH) like logging writing/doing command started to be signifficantly slow. Example before password login prompt appear, like sometimes 5 seconds..
  18. ICPH

    Disk not mounted after install? How to properly mount it?

    I got physical dedicated server from one reputable server provider. And using their OS image install system i applied debian 6.x 64. Server has 2 SSD and one SATA. I setup software raid 1 during installation on SSDs but i dont see anything that looks like my HDD setup.. I mean server should...
  19. ICPH

    Higher %wa value on OpenVZ server

    I think You are very near of what is happening on my server.. I have one big mysql on vm 190, but mysql tunners reports optimal settings. Here is the iotop you adviced to run:
  20. ICPH

    Higher %wa value on OpenVZ server

    Hello, there is higher %wa value on top command both on VPS and on host server (OpenVZ virtualization). Both RHEL CentOS 5.x VPS:   Host server:   host server load is usually around 9, server having 16 cores.   Please anyone can advice some commands or ideas? Thank you
Top
amuck-landowner