Latency monitoring of common DCs and hosts

[WebSearchingPro]

BHS = Beauharnois, Canada

CHI = Chicago, Illinois

DAL = Dallas, Texas

LAX = Los Angeles, California

LHR = London

MIA = Miami, Florida

Thanks @Damian, and @Zach, for lhr/bhs respectively!

Hopefully this helps someone who may not know!

 

[Damian]

LHR = London

 

[Zach]

bhs = ?

chi = Chicago, Illinois

dal = Dallas, Texas

lax = Los Angeles, California

lhr = London

mia = Miami, Florida

I'm not familiar with bhs, what would this be? Thanks! - Google turned up no conclusive results.

Thanks @Damian, for lhr!

Beauharnois, Canada = BHS (OVH)

 

[NodeBytes]

@zach - you should have them add SouthBendServers

 

[KuJoe]

Anybody else getting a huge amount of traffic from them? We're seeing over 120Mbps in/out for the past few hours. Not sure why but hopefully they resolve it soon or we'll have to start blocking their IPs at the router.

 

[scv]

+ anyNode

title = anyNode (Multiple)

menu = anyNode (Multiple)

++ LocationOne

title = anyNode Detroit

menu = Southfield, MI

host = 67.214.115.92

++ LocationTwo

title = anyNode Chicago

menu = Chicago, IL

host = 216.107.159.5

 

[kaniini]

Anybody else getting a huge amount of traffic from them? We're seeing over 120Mbps in/out for the past few hours. Not sure why but hopefully they resolve it soon or we'll have to start blocking their IPs at the router.

To clarify: Our monitoring activities are using less than 5mbps in aggregate across 1000 hosts.  KuJoe reached out to me in PM and we sorted out the confusion (I believe anyway).

(If it took 120mbps to monitor a host we would not be operating this.)

 

[kaniini]

All requested providers should now be added.

 

[KuJoe]

To clarify: Our monitoring activities are using less than 5mbps in aggregate across 1000 hosts.  KuJoe reached out to me in PM and we sorted out the confusion (I believe anyway).

(If it took 120mbps to monitor a host we would not be operating this.)

Yes, the problem was on our end.

 

[kaniini]

As a general advisement, the BHS probe will be retired at some point between August 1 and August 31.  This is, of course, related to our pull-out from OVH.

 

[InfiniteTech]

Here you go:

+ Infinite Tech

title = Infinite Technologies Limited (Amsterdam, The Netherlands)

menu = Infinite Tech (Amsterdam, The Netherlands)

host = 91.215.158.158

 

[fred.kard]

Dear All,


I'm trying to install smokeping slave on raspberry pi.


After sudo apt-get install smokeping done, i'm running the smokeping with this command ==>


" sudo /usr/sbin/smokeping -master-url=http://10.10.10.23/cgi-bin/smokeping.cgi -cache-dir=/var/smokeping/ -shared-secret /var/smokeping/secret.txt "


Then this error comes up ==>


"WARNING: Opening secrets file /etc/smokeping/smokeping_secrets: Permission denied


ERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ?


"


this is file permission of /etc/smokeping/smokeping_secrets ==>


pi@raspberrypi ~ $ ls -lrt /etc/smokeping/smokeping_secrets


-rw-r----- 1 smokeping smokeping 59 Mar 17 2013 /etc/smokeping/smokeping_secrets


anyone can give me a clue what is going on ? I have change the permission with chmod 400 and chmod 600 with no luck.


thanks before